Apple Chinese Language Kit - Manual (Page 21)

Installing and Setting Up the Software 21
To convert a plug-in, follow these steps:
1 Locate and open the Input Method Plug-in Converter.
It is in the Chinese Utilities folder in the Apple Extras folder.
2 Choose Open from the File menu.
3 In the dialog box that appears, locate the text file for the plug-in and open it.
After you convert a plug-in, place it in the Input Method Plug-in folder, which is in the
Extensions folder (in the System Folder) on your hard disk and restart your computer. If
there isn’t an Input Method Plug-in folder in the Extensions folder, create one.
Removing the Chinese Language Kit
If you decide you want to remove the Chinese Language Kit software, you use the same
Installer program you used to install the software.
To remove the Chinese Language Kit software, follow these steps:
1 Insert the Chinese Language Kit CD-ROM disc in the CD-ROM disc drive.
2 Double-click the Installer icon.
3 Click Continue when the Installer dialog box appears.
4 Click Agree when the License Agreement dialog box appears.
The Installer dialog box appears.
5 Choose Custom Remove from the pop-up menu.
6 Click to select the software you want to remove.
7 Make sure that the Destination Disk is the hard disk from which you want to remove the
Chinese Language Kit.
If the destination disk isn’t correct, click Switch Disk until the correct disk is shown.
8 When you are ready, click Remove.
9 Follow any directions that appear onscreen.
10 When the Installer finishes, you may need to restart your computer.
Warning
If you remove the “Minimum Simplified Chinese and Beijing Font” or the
“Minimum Traditional Chinese and Taipei Font” option and you do not remove the other
input method fonts, you will not be able to use the fonts and your system software may
not work properly.