Pioneer SC-LX90 - Manual (Page 92)

HDMI Control 09
92
En
Setting the HDMI options
You must adjust the settings of this amplifier as well as
HDMI Control-compatible connected components in
order to make use of the HDMI Control function. For
more information see the operating instructions for each
component.
Setting the HDMI Control mode
Choose whether to set this unit’s HDMI Control function
ON or OFF. You will need to set it to ON to use the HDMI
Control function.
• When using a TV not manufactured by Pioneer, put
this setting to OFF.
1 Set the operation selector switch to AMP, then
press the SETUP button.
2 Select ‘Other Setup’, then press ENTER.
3 Select ‘HDMI Control Setup’ from the Other Setup
menu.
4 Select the ‘HDMI Control’ setting you want.
• ON – Enables the HDMI Control function. When this
unit’s power is turned off and you have a supported
source begin playback while using the HDMI Control
function, the audio and video output from the HDMI
connection are output from the plasma television. 1
• OFF – The HDMI Control is disabled. Synchronized
operations cannot be used. When this unit’s power is
turned off, audio and video of sources connected via
HDMI are not output.
5 When you’re finished, press SETUP.
You will finish to System Setup menu.
Before using synchronization
Once you have finished all connections and settings, you
must:
1 Put all components into standby mode.
2 Turn the power on for all components, with the
power for the plasma television being turned on last.
3 Choose the HDMI input to which the TV is
connected to this amplifier, and see if video output
from connected components displays properly on the
screen or not.
4 Check whether the components connected to all
HDMI inputs are properly displayed.
Synchronized amp mode
Synchronized amp mode begins once you carry out an
operation for the plasma television. For more
information, see the operating manual of your plasma
television.
Synchronized amp mode operations
By connecting a component to this amplifier with an
HDMI cable you can use synchronized amp mode, which
allows you to synchronize the following operations 2 :
• Displays on the plasma television when you mute or
adjust the volume of this amplifier.
• The input of this amplifier is automatically changed
when playback occurs on a connected component.
• Even if you change this amplifier’s input to a device
that is not connected by HDMI, the synchronized
amp mode remains in effect.
• This amplifier’s input switches automatically when
the channel is switched on an HDMI control-
compatible plasma television.
• This amplifier’s OSD language switches
automatically when the menu language is switched
on an HDMI control-compatible plasma television.
• By pressing GENRE when listening to a source from
a HDD/DVD recorder, the most appropriate listening
mode is automatically selected (see
Using the genre
synchronizing function on page 39 for more on this).
Canceling synchronized amp mode
Operate the plasma television to cancel the synchronized
amp mode.
If you cancel synchronized amp mode while connected
via HDMI to a plasma television or while you are watching
a TV programme, the power for this unit is turned off.
Note
1 • When HDMI Control is set to ON, the audio/video signals input at the HDMI IN terminals are output at the HDMI OUT terminal even when this
amplifier is switched off.
• With HDMI Control set to ON, Input Setup and HDMI Input are automatically set to OFF.
: R e t u r n
a . M u l t i C h I n S e t u p
b . Z O N E V i d e o S e t u p
c . Z O N E Au d i o S e t u p
d . S R + S e t u p
e . H D M I C o n t ro l S e t u p
f. i . L I N K C h e ck
g . D i s p l ay I m ag e
9 . O t h e r S e t u p
DV D / L D - 5 5 . 0 dB
H D M I C o n t ro l O F F
9 e . H D M I C o n t ro l S e t u p
DV D / L D - 5 5 . 0 dB
: F i n i s h
2 The linked mode remains in effect even when this amplifier’s input is switched to something other than HDMI.
SC_LX90_WY.book Page 92 Wednesday, February 6, 2008 11:49 AM