Pioneer SC-LX90 - Manual (Page 39)

Listening to your system 05
39
En
Using the genre synchronizing function
This feature automatically selects the most appropriate
Advanced Surround mode for the source currently being
played back on a Pioneer DVD recorder supporting HDMI
Control connected to this amplifier via HDMI.
1
For details
on HDMI Control, see About HDMI on page 19.
1 Set the operation selector switch to AMP.
2 Press GENRE while the source assigned to a genre
is being played back.
The most appropriate Advanced Surround mode for the
source being played back is automatically selected.
Dolby Digital Plus/Dolby TrueHD/WMA9
Pro (44.1 kHz/48 kHz) encoded stereo
sources ON   a  d
AUTO  b  d
DTS-HD Master Audio/DTS-HD/
DTS-EXPRESS/WMA9 Pro (88.2 kHz/96
kHz) encoded stereo sources ON
AUTO
a. Only applicable when using the Virtual Surround Back mode.
b. Not applicable when using the Virtual Surround Back mode.
c. Sound is output from the surround back speakers only when
THX Ultra2 CINEMA, THX MUSIC or THX GAMES is selected.
d. Advanced surround mode may not be available depending on the input signal.
Type of source
SBch
Processing /
Virtual SB
mode
Standard / THX
Advanced
surround
Multichannel
sources
Stereo sources
2 Pro Logic IIx 2 Pro Logic Neo:6
Note
1 • This feature is available only when the source being played back is assigned to a genre. When the source has no genre assigned to, NO GENRE appears
showing that this feature is not available.
• Make sure that HDMI Control is set to ON. When OFF is selected, CANNOT SELECT appears showing that this feature is not available (see About HDMI
on page 19).
SOURCE TV AMP
VOL
VOL CH
SOURCE TV AMP
SR+
CLR
SBch PHASE iPod CTRL
A.ATT GENRE HDMI OUT
ENTER
MCACC
DISP
CH
GENRE
SC_LX90_WY.book Page 39 Wednesday, February 6, 2008 11:49 AM