Konica Minolta FK-102 - Manual (Page 85)

Timer Transmission - (continued)
2-47
0
Simple FAX
Transmission
Placing the
Original on the
Machine
Setting
Transmission
Conditions
Selecting a
Remote Station
Operation
During
Scanning
Operation
During
Transmission
Reserving
Transmission
Manual
Transmission
Canceling
Transmission
Confirming
Reserved
Documents
Confirming
Communica-
tion Results
Memory
Transmissions
Total page set
Timer
Transmission
International
Communication
Sender
Information
2
Transmission
9.
Set the original document.
For details, see "Placing the Original on the Machine" (p. 2-5).
10.
Press [START].
The FK-102 reads the document and holds it in memory until the specified time when
transmission starts.
•
To suspend transmission, see "Canceling Transmission" (p. 2-33).
•
If the remote station is not ready to receive, your call will be redialed. For information
about redialing, see "Manual Redialing" (p. 2-21) in "Selecting a Remote Station".
•
If transmission fails, see "Cannot Send Messages" (p. Appendix-4).
Batch transmission
When transmmitting more than one document at a specified time for documents with the
same destination or the transmission time, store the documents in memory.
The following transmission conditions must be met for the batch transmission.
• Memory transmission, Resolution, International communication, ECM and V34
• Confidential transmission, Relay request, Closed transmission and Transfer function
are not used.
HINT
HINTS