Konica Minolta FK-102 - Manual (Page 192)

Setting One-touch/Program - (continued)
9-14
• When entering the FAX number on the key pad
You can use Ext line, Tone, Pause and -.
Ext line : The outside line access code can be entered only when PBX connec-
tion is defined as ON. [E] is indicated on the screen.
Tone : Use to generate tone signals when the dial line is used. You can use
this to utilize FAX information service. [T] is indicated on the screen.
In case of the dial (pulse) line, you can switch it to the push-button tone using the asterisk "*"
button.
Pause : [P] is indicated on the screen.
Use this code to place a space between digits. Pressing Pause gener-
ates a space of 1 second. You can enter this code repeatedly.
If Pause is pressed following a "0" or another number used to call an
outside line from an extension, you can dial with reliability.
- : [-] is indicated on the screen. This code serves as a delimiter between
digits when dialing and produces no effect actually.
•
To correct a wrong entry, use DELETE or [STOP/CLEAR].
•
At this moment, the subsequent unregistered program number appears in [Program No.].
If you want to register the program No., press Program No. and input the new No. with
the key pad.
5.
Enter the name of the One-touch/Program operation.
•
Enter the name of the One-touch/Program operation as necessary. See "Entering Char-
acter Strings" (p. Appendix-2).
•
The name can be up to 24 characters.
6.
If you do not want to enter any more information for the One-
touch/Program operation, press ENTRY. Go to step 10.
To configure the original settings or register the functions on the Fax Application screen,
go to step 7 and 8.
FOR DETAILS
FOR DETAILS
FOR DETAILS