Konica Minolta FK-102 - Manual (Page 272)

Function Set - (continued)
10-50
14.
Press BACK.
The PC-Fax Rx set screen will be restored.
15.
Press OK, then press BACK.
If you didn’t enter a password in step 7, the Check Password filed is grayed out.
The setting is changed and you return to the FAX Key Operator Mode screen.
Refer to (p. 10-5) to exit from the Key Operator mode.
The table below shows combinations of the functions and actions at PC-Fax reception.
*: By default, settings are set to save a received file in the Fixed Box. You have the option of
printing received file without saving it in any box. Ask your service representative about
this possibility.
Example: When designating a Box using the Confidential Tx feature
(F-code) (between FK-102s)
PC-FAX Rx set
Rx Output Box
OFF ON
Fixed Box not Available Saved in Fixed Box No.0000
Designated Box not Available
Saved in a Box between
No.1000 and 1099, as desig-
nated by the sender. If no box
is designated, the file is saved
in the Fixed Box*.
Sender Recipient
1. Set the PC-Fax Rx settings as dis-
cussed previously.
2. Set the Confidential Tx settings. Type in a
four-digit number between 1000 and 1099 in
the Box No. field.
The recipient needs to type in a preset four-
digit password to access a received data.
3. Type in a recipient at the FAX Basic screen,
and press [START]. Transmission starts.
4. Receives transmitted data. Actions at
reception depend on the current settings
concerned. Refer to the table above.
HINT