Konica Minolta FK-102 - Manual (Page 259)

Function Set - (continued)
10-37
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
3.
Press Compulsory mem. Rx.
When the optional print controller is attached the screen appears as above.
4.
Press ON and fill the Password box with the password
needed to print out the document received.
•
The password is a number of up to 4 digits.
•
If you press [Stop/Clear], the information you have entered will be deleted.
•
To exit, press CANCEL.
5.
Press OK and then BACK.
The value of the parameter is changed and you return to the FAX Key Operator Mode
screen.
Refer to (p. 10-5) to exit from the Key Operator mode.
FOR DETAILS
FOR DETAILS
HINT