Konica Minolta FK-102 - Manual (Page 235)

10-13
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
FAX Screen Set
In this mode, you determine the initial settings of the Fax Basic screen.
• Main menu display mode: Remote Stn list */ Setting / Key pad
• Remote station default:
Program* / Abbr / Redial / Group
• Group display default:
None * / Program / Group 1 / Group 2 / Group 3
• Abbr display default:
None * / A- / D- / G- / J- / M- / P- / T- / W- / No.etc
• RADF mode:
One-sided * / Two-sided / Cover+2 sided
• FAX resolution:
Normal * / Fine / S-Fine
• FAX image quality:
Text* / Photo / Text / Photo
• FAX density:
Auto* / Lighter / Normal / Darker
• Auto reset timer:
OFF / 30 / 60* / 90 / 120 / 150 / 180 / 210 / 240 / 270 / 300
• Tx / Rx auto display change: ON / OFF*
• FAX screen first:
ON / OFF*
• Select all group stn:
ON / OFF*
• One touch No.40 key set:
One touch* / FAX mode
Sets the operation when the one-touch No. 40 key is
pressed.
• When you select [One touch], the contents registered in
the key is activated.
• When you select [Fax mode], the Fax mode screen will
appear. The program No. will be 01-39.
* indicates factory default setting.