Konica Minolta FK-102 - Manual (Page 43)

2-5
0
Simple FAX
Transmission
Placing the
Original on the
Machine
Setting
Transmission
Conditions
Selecting a
Remote Station
Operation
During
Scanning
Operation
During
Transmission
Reserving
Transmission
Manual
Transmission
Canceling
Transmission
Confirming
Reserved
Documents
Confirming
Communica-
tion Results
Memory
Transmissions
Total page set
Timer
Transmission
International
Communication
Sender
Information
2
Transmission
Placing the Original on the Machine
The RADF and platen glass are available for scanning originals with this machine. When an orig-
inal is placed in the RADF, the original is scanned by moving through the RADF automatically.
Using the RADF
When using the RADF, multiple originals can be scanned automatically. In addition, two-sided
originals can also be sent.
1.
Close the RADF.
2.
Align the originals starting with the first page.
3.
Place the originals in the RADF with the side to be scanned
facing up.
4.
Adjust paper guides.
In Mixed original, extend the paper guide at the maximum and place the originals in the left
rear corner.
FOR DETAILS