Konica Minolta FK-102 - Manual (Page 267)

Function Set - (continued)
10-45
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
(A) If the Auto shut off mode is activated during a preset print inhibit time, the print inhibit
mode is switched back on (and no documents are printed out).
(B) If the Auto shut off mode is activated outside of a preset print inhibit time, the shut off
mode continues until the power is switched back ON (and documents are printed out as
they are received).
Auto shut off mode is discussed in "Section 11, Key Operator Mode, Power Save", in the
Copier User’s Manual.
(1) If you want the power to switch back ON at a certain time, as determined by a weekly
timer setting, and let documents be printed out as they are received at night, then set the
weekly timer so that it is switched ON after the a time you'd get by subtracting the shutoff
time from the print inhibit END time. Refer to (B) in the figure on the preceding page.
(2) If you want receiving documents to be stored in memory only at night on weekdays, and
through out the day on weekends, then set the weekly timer as in (1) for weekdays, and
set it OFF for weekends.
FOR DETAILS