Konica Minolta FK-102 - Manual (Page 257)

Function Set - (continued)
10-35
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
4.
Fill the Tx No. box with the FAX number to which the docu-
ment should be transferred.
•
You can enter up to 38 digits in the Tx No. box.
•
You can use Tone, Pause and -. see "Selecting a Remote Station" (p. 2-13).
•
To correct the wrong entry, use DELETE.
•
If you press [Stop/Clear], the information you have entered will be deleted.
•
To stop setting up, press CANCEL.
5.
Press EDIT of Tx/Print to select a transfer condition.
• [No forward Tx]
The received document is not transferred.
• [Forward Tx + Print (always)]
The received document is transferred and printed by this machine as well.
• [Forward Tx + Print (error)]
The received document is transferred. If the transfer failed, the document is printed
by this machine.
When PC-FAX Rx set is ON, Tx/Print will be No forward Tx/Forward Tx+PC (always)/
Forward Tx+PC (error).
6.
Press OK and then BACK.
The setting is changed and you return to the FAX Key Operator Mode screen.
Refer to (p. 10-5) to exit from the Key Operator mode.
FOR DETAILS
FOR DETAILS
HINT