Konica Minolta FK-102 - Manual (Page 247)

10-25
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
PBX Connection Mode Options
These are the options on PBX that you can choose.
• PBX CN mode
: ON/OFF*
Select ON when your FK-102 is connected to PBX line.
• Exit line access code
: 0-9 (0 *)
When PBX connection mode is set to ON, this parameter
determines the outside line access code. The external line
access code is the prefix attached to the telephone number
when dialing to an external line. This prefix will be dialed
when external line option is selected with abbreviated dial
number or One-touch/Program.
• Attaching outside line accesscode to abbreviated telephone No.:
When PBX connection mode is set at ON, the outside line
access code will be attached automatically to the abbrevi-
ated dial number.
• Removing outside line access code from abbreviated telephone No.:
When PBX connection mode is set at OFF, the outside line
access code will be removed automatically from the abbre-
viated dial number.
* indicates factory default setting.
1.
Open the Fax Key Operator Mode (See "Entering Key Opera-
tor" (p. 10-2)).
2.
Press PBX CN mode set.