Konica Minolta FK-102 - Manual (Page 232)

FAX Key Operator Mode - (continued)
10-10
Report output set
Sets the method to print a report. (p. 10-27)
*1
: Tray type may be different depending on the installed option.
* indicates factory default setting.
Item Description Available value
Communication
Journal
Determines whether to print the report and
the timing at which the report will be printed
out.
OFF / Daily / 100 com.* /
100 & daily
Transmission
report
Always / Only error* / OFF
Sequential Tx
report
ON* / OFF
Tx reservation
report
ON* / OFF
Confidential Rx
report
ON* / OFF
Bulletin Tx report ON* / OFF
Relay Tx result
report
ON* / OFF
Relay request Rx
report
ON* / OFF
PC-FAX Tx Error
Report (With
Optional Print Con-
troller)
ON* / OFF
Sync. Result Rpt
output
Determines how to print the synchronous
result report. If you select "All stn", all of the
reports will be printed out after all transmis-
sions are completed. If "each stn" is selected,
the report will be printed out after each trans-
mission.
All stn* / each stn
Tx result report
select
Determines whether to display the transmis-
sion result report select screen. If you select
"ON", it will be displayed after each transmis-
sion.
ON / OFF*
Paper tray for
report
*1
Specifies the paper tray used to print out a
report. Tray 1 / Tray 2* / Tray 3 /
Tray 4 / Bypass