Konica Minolta FK-102 - Manual (Page 249)

10-27
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
Report Output set
You may select the Report output set to be On or Off. This settings prints the reports of communi-
cation management, communication result and reservation, and the input/output trays for the
reports. If ON is selected, the manner of printing may also be selected.
• Communication Journal:
OFF / Daily / 100 com.* / 100 & Daily
• Transmission report:
Always / Only error * / OFF
• Sequential Tx report:
ON* / OFF
• Tx reservation report:
ON* / OFF
• Confidential Rx report:
ON* / OFF
• Bulletin Tx report:
ON* /OFF
• Relay Tx result report:
ON* /OFF
• Relay Request Rx report:
ON* /OFF
• PC-Fax Tx Error Report:
ON* /OFF
• Sync. Result Rpt output:
All stn* / each stn
• Tx result report select:
ON / OFF*
• Paper tray for reports:
Tray 1 / Tray 2* / Tray 3 / Tray 4 / Bypass
* indicates factory default setting.
•
Select ON in "Tx result report select screen," the transmission report will be printed if YES
is selected. The report will not be printed if NO is selected.
•
Tray used depends on trays installed.
1.
Open the Fax Key Operator Mode (See "Entering Key Opera-
tor" (p. 10-2)).
FOR DETAILS