Konica Minolta FK-102 - Manual (Page 245)

Transmission/Reception Mode Options - (continued)
10-23
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
• Rx Print quantity set *6
: 1* to 10
This parameter determines the number of printouts.
• 2 sided reception *7
: OFF* /ON
When ON is selected, printout will be made on both faces of
paper.
* indicates factory default setting.
*1:
Selecting "Every page" in "Reception output mode," "2 in 1 print" is set to "OFF" regard-
less of its setting.
*2:
To enable the setting of "Rx Paper selection," select "Automatic" in "Rx feed tray (fix)."
*3:
Selecting "100%" in "Reduction for record," the setting of "Rx feed tray (fix)" will be
"Automatic." "2 in 1 print" and "Page divided print" will be set to "OFF" regardless of their
settings.
*4:
"Page divided print" will be set to "OFF" if:
2 sided reception is set to ON, Reduction for record is set to 100%, 2 in 1 print is set to
ON, or Rx feed tray (fix) is set to other than Automatic.
*5:
Tray type may be different depending on installed options.
*6:
If "Every page" is selected in "Reception output mode," it is set to "1" automatically.
*7:
It will be enabled only if "Reception output mode" is set to "After all."
1.
Open the Fax Key Operator Mode (See "Entering Key Opera-
tor" (p. 10-2)).
2.
Press Tx/Rx mode set.
FOR DETAILS