Konica Minolta FK-102 - Manual (Page 119)

2 in 1 Transmission - (continued)
6-8
1.
Press [FAX] on the control panel to view the FAX Basic
screen if it is not already displayed.
2.
Press [APPLICATION] on the control panel.
3.
Press 2 in 1 Tx.
To release the setting, press CANCEL or 2 in 1 Tx again.
4.
Press OK.
The FAX Basic screen will be restored.
5.
Set other functions if necessary.
See "Setting Transmission Conditions" (p. 2-10) for setting functions on the FAX Basic
screen. See "Application functions overview" (p. 6-4) for setting functions on the FAX Appli-
cation Menu screen.
6.
Designate the remote station.
See "Selecting a Remote Station" (p. 2-13) for information about designating the remote sta-
tion.
7.
Set the original document on the RADF with the side to face
up.
8.
Press [START].
The FK-102 reads the document and stores it in memory as a reserved document
before transmission starts.
•
To suspend transmission, see Canceling Transmission (p. 2-33).
•
If the remote station is not ready to receive, your call will be redialed. For information
about redialing, see "Redialing" (p. 2-24) in "Selecting a Remote Station" (p. 2-13).
•
If transmission fails, see "Cannot Send Messages" (p. Appendix-4).
FOR DETAILS
HINT
HINT
HINTS