beautypg.com

3) quality, 4) density, Setting transmission conditions - (continued) – Konica Minolta FK-102 User Manual

Page 49

background image

Setting Transmission Conditions - (continued)

2-11

0

Simple FAX

Transmission

Placing the

Original on the

Machine

Setting

Transmission

Conditions

Selecting a

Remote Station

Operation

During

Scanning

Operation

During

Transmission

Reserving

Transmission

Manual

Transmission

Canceling

Transmission

Confirming

Reserved

Documents

Confirming

Communica-

tion Results

Memory

Transmissions

Total page set

Timer

Transmission

International

Communication

Sender

Information

2

Transmission

As originals are scanned with increasing fineness, the amount of data that is sent also
increases, and more time is required for transmission.

When S-Fine has been selected and the receiving machine is not equipped with an S-
Fine
mode, originals are sent at a resolution corresponding to the reception capability of
the receiving machine.

(3) Quality

Set Quality according to the contents of the original. There are three types of Quality set-
tings. Text is set at the time of purchase.

Photo........................................ Press this when scanning originals containing photo-

graphs only.

Text/Photo ............................... Press this when scanning originals containing both text

and photographs.

Text........................................... Press this when scanning originals containing text only.

(4) Density

Set Density according to the density of the original. There are four types of Density settings.
Auto is set at the time of purchase.

Auto.......................................... This activates the automatic density adjustment function

so that density is set automatically.

DARKER................................... Press to scan originals so that they are darker than the

density set with Auto.

NORMAL .................................. Press to scan originals at a density that is between

DARKER and LIGHTER.

LIGHTER .................................. Press to scan originals so that they are lighter than the

density set with Auto.

This setting activates the automatic density adjustment function so that originals are
scanned at the proper density. Press LIGHTER or DARKER to select density that is lighter or
darker than density selected in Auto mode.

FOR DETAILS

FOR DETAILS