Setting relayed transmission – Konica Minolta FK-102 User Manual
Page 205
9-27
0
Setting
abbreviated dial
numbers
Setting One-
touch/Program
Setting dial
groups
Setting relayed
transmission
Setting the
confidential
boxes
Setting the
bulletin board
9
Destination
Setup
Setting relayed transmission
The FK-102 is provides the ability to relayed transmission to multiple stations that use F-codes.
For your FK-102 to serve as a relay station, a relay box number, relay password and destination
dial group to which information is to be distributed must be defined for your FK-102.
The procedures of registering relayed transmission to multiple stations, changing relayed trans-
missions, and deleting relayed transmissions are described below.
• Relay box number: ...................... One out of five boxes, 100-104, can be designated.
• Relay password: .......................... Designate a 4-digit number.
• Destination dial group number: ...Designate one of the dial groups defined for your FK-102.
•
The information defined must be given to the station (FAX) that will issue relay requests.
•
It is required that the destination dial group number you are going to define here must be
defined as a dial group number in advance. To define dial group numbers, see "Setting
dial groups" (p. 9-21).
•
The function of relayed transmissions to multiple stations can be used only when the func-
tion is turned ON.
•
For operation of relay request, see "Relay Transmission Request" (p. 6-42).
Scheme of relayed transmission to multiple stations
The station (FAX) that originates transmission, that which relays the transmission, and those that
terminate the transmission work as shown below.
Originating station
Issues a relay request.
Relaying station
Transmits the same infor-
mation to multiple sta-
tions.
Terminating stations
Receives the information.
This originates a trans-
mission of FAX document
sent to the relaying sta-
tion, with a relay box num-
ber and relay password
designated.
The document sent from
the originating station
enters specified relay box
in the memory tempo-
rarily.
The document held in the
relay box is transmitted to
the destination group des-
ignated.
Receives the document
sent from the relaying sta-
tion.
FOR DETAILS