Konica Minolta FK-102 - Manual (Page 83)

2-45
0
Simple FAX
Transmission
Placing the
Original on the
Machine
Setting
Transmission
Conditions
Selecting a
Remote Station
Operation
During
Scanning
Operation
During
Transmission
Reserving
Transmission
Manual
Transmission
Canceling
Transmission
Confirming
Reserved
Documents
Confirming
Communica-
tion Results
Memory
Transmissions
Total page set
Timer
Transmission
International
Communication
Sender
Information
2
Transmission
Timer Transmission
The function of Timer transmission allows specifying the time to start communication. You can
save money by specifying communication to start during the night or early in the morning when
telephone charges are calculated at discount rates.
>>> Specifications for Timer Tx <<<
• When using Timer Tx, Memory Tx is selected automatically.
• You can specify the timer-on time in the range of up to 24 hours. The date cannot be
specified.
• You specify the time in minutes and hours.
• A total of up to 20 destinations can be specified for Timer transmission and Polled com-
munication, inclusively but not respectively. Sequential polling accepts only one destina-
tion.
Functions incompatible with Timer Tx
Total page set, Polled Tx, Bulletin, Polling Rx (When selecting Polling Rx in advance, Timer
Tx can be set.)
Set Polling Rx previously in case of Polling Rx used together.
1.
Press [FAX] on the control panel to view the FAX Basic
screen, if it is not already displayed.
2.
Press [APPLICATION] on the control panel.
3.
Press Timer Tx.
p