Original size set, Press [ application ] on the control panel, Press original size set – Konica Minolta FK-102 User Manual
Page 126
6-15
Opening the
Application
Screen
Application
functions
overview
2 in 1
Transmission
Book
Transmission
Frame erase
Transmission
Original size set
Mixed original
Z folded original
Long original
Upside down
ECM off
Confidential
communication
V34 OFF
ID
Transmission
Relay
Transmission
Request
One-touch/
Program
6
Transmission
Applications
Original size set
The Original size select function enables you to designate the paper size for the document to be
transmitted to be equal to the paper size loaded at the receiving end. This means that the major
portion of your original image will be printed without any reduction. Normally, when the paper size
loaded at the remote station is too small to accommodate the image being transmitted, the origi-
nal image will be reduced to fit the paper size. This feature gives you the option printing a portion
of the image with no reduction.
>>> Specifications for Original size set <<<
• Memory Tx is selected automatically.
• The location where originals are read differs when the original is placed on the RADF or
platen glass.
• When Original size set and Mixed size original are specified simultaneously, the size
specified by Original size set is effective.
Functions incompatible with Original size select
Polling Rx, Total page set, Bulletin board polling Rx
When 2 in 1 Tx or Book Tx is set, paper sizes which are not be able to set are shown in
gray.
1.
Press [FAX] on the control panel to view the FAX Basic
screen if it is not already displayed.
2.
Press [APPLICATION] on the control panel.
3.
Press Original size set.