Konica Minolta FK-102 - Manual (Page 140)

6-29
Opening the
Application
Screen
Application
functions
overview
2 in 1
Transmission
Book
Transmission
Frame erase
Transmission
Original size set
Mixed original
Z folded original
Long original
Upside down
ECM off
Confidential
communication
V34 OFF
ID
Transmission
Relay
Transmission
Request
One-touch/
Program
6
Transmission
Applications
ECM off
Transmission can be made with ECM disabled. Error Correction Mode (ECM) is a mode of trans-
mission with error correction established by ITU-T (International Telecommunications Union).
FAX machines provided with the ECM feature can communicate with each other and can confirm
that the data sent is free from errors. Thus, communication can be made free from disturbances
due to line noises, etc. The FK-102 employs ECM for transmission unless you disable it.
>>> Specifications for ECM off <<<
• If there are much line noises, the communication time may be a little bit longer with ECM
enabled than with ECM disabled.
• ECM will be resumed automatically on completion of transmission.
Functions incompatible with ECM off
Polling Rx, Polled Tx, V34 OFF, Bulletin, Polling Rx
1.
Press [FAX] on the control panel to view the FAX Basic
screen, if it is not already displayed.
2.
Press [APPLICATION] on the control panel.
3.
Press .
4.
Press ECM off.
To exit, press CANCEL or press ECM off again.
5.
Press OK.
The FAX Basic screen will be restored.
6.
Set other functions if necessary.
See "Setting Transmission Conditions" (p. 2-10) for setting functions on the FAX Basic
screen. See "Application functions overview" (p. 6-4) for setting functions on the FAX Appli-
cation Menu.
7.
Designate the remote station.
See "Selecting a Remote Station" (p. 2-13) for designating the remote station.
FOR DETAILS
HINT
HINT