Fax key operator mode - (continued), 8 tx/rx mode set – Konica Minolta FK-102 User Manual
Page 230
FAX Key Operator Mode - (continued)
10-8
Tx/Rx mode set
Sets the print method at the transmission/reception mode. (p. 10-22)
*1: Tray type may be different depending on the installed option.
* indicates factory default setting.
Item
Description
Available value
Transmission mode
Determines the initial value of transmission
mode.
Quick Tx / Memory Tx*
Reception output
mode
Determines the timing at which the document
received should be printed out. If you select
"After all", printout will be produced after all
pages are received. If "Every page" is selected,
printout will be produced page by page.
After all* / Every page
2 in 1 print
When ON is selected, each pair of pages of
the original document will be printed on a
page in the form of 2-in-1.
OFF* / ON
Shifting to power
save
If you have selected "Immediate (1 minute)" for
your FK-102 and it is in power save mode when
input signals come, then your FK-102 will
resume power save mode "immediately (in 1
minute)" after completion of reception.
Normal* / Immediate (1
minute)
Inch paper priority
By setting "ON", the unit gives Paper choices
priority to inch paper.
ON* / OFF
Rx Paper selection
If a "priority" size is specified, paper size will
be selected with priority given to that size. If
"Automatic" is selected, the paper size that is
the closest to the original size will be taken. If
a "fixed" size is specified, only the specified
size will be used but not any other.
Automatic* / 8.5"x11" pri-
ority / 8.5"x11" fix /
8.5"x14" priority / 8.5"x14"
fix / 11"x17" priority /
11"x17" fix
Reduction for
record
Determines the rate of reduction in size in
reproducing the document image.
100% / 96%* / 95% / 94% /
93% / 92% / 91% / 90% /
89% / 88% / 87%
Page divided print
When ON is selected and your FK-102
receives a page longer than the fixed size, it
will be divided into more than one page.
OFF* / ON
Rx feed tray (fix)
*1
Determines the paper tray if you want to fix
the paper tray for received document.
Automatic* / Tray 1 / Tray 2
/ Tray 3 / Tray 4
Polling Tx file
delete
Determines whether to delete document after
the polling transmission.
YES* / NO
Rx print quantity set Determines the number of printouts.
1* to 10
2 sided reception
When ON is selected, printout will be made
on both faces of paper.
OFF* / ON