Konica Minolta FK-102 - Manual (Page 265)

Function Set - (continued)
10-43
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10
Key Operator
3.
Press OFF mode print set.
When the optional print controller is attached the screen appears as above.
4.
Press YES or NO, as required.
If you pressed NO, enter START and END times using the numeric key pad on the con-
trol panel.
(Example: Enter 2000 in START, and 0800 in END to set the print inhibit time to
between 8:00 p.m. and 8:00 a.m.)
5.
Press OK, then press BACK.
The setting is changed, and you return to the FAX Key Operator Mode screen.
Refer to (p. 10-5) to exit from the Key Operator mode.
FOR DETAILS
HINT