Front cover, Front + back covers, Book erase - frame erase – Konica Minolta bizhub 421 User Manual
Page 97: Binding position
501/421/361
4-44
Transmitting data
4
Front Cover
Select this setting to scan the first page as the front cover.
Front + Back Covers
Select this setting to scan the first page as the front cover, the second page as the back cover, and the
remaining pages as the body.
Book Erase - Frame Erase
Select this setting to specify frame erasing for page spreads.
-
To erase the same width on all sides, touch [Frame], and then specify a value (range: 1/16 to 2 inches
(0.1 to 50.0 mm)).
-
To specify different widths for the top, left, right, and bottom, touch the button for the desired location,
and then specify a value.
-
To cancel frame erasing, touch [No].
!
Detail
If a width to be erased around the original is specified with "Frame Erase" in the Book Copy screen, the
same settings are also applied to "Frame Erase" in the Frame Erase screen.
Binding Position
If "Separation", "Front Cover", or "Front + Back Covers" was selected, touch [Binding Position], and then
select the binding position.