Konica Minolta bizhub 421 - Manual (Page 205)

501/421/361 8-34
User mode settings 8
8.2.13 Scan/Fax Program
Register a combination of destination to which data is sent frequently, scan setting, original setting, and
communication setting in program. If these items are registered in program, you can call the registered
destination, and the Scan Setting mode, Original Setting mode, and Communication Setting mode by simply
touching the [Mode Memory] key.
In the program address registration, the address of 400 items can be registered by Fax/Scan function.
(When not having equipped with the optional hard disk, it can register to 200 items.)
!
Detail
If 400 programs have been already registered, delete an unnecessary program, and then register new
one.
Register Scan/Fax Program
1
Press the [Fax/Scan] key on the control panel, and then specify Scan Settings, Original Settings and
Communication Settings for program registration.
2
Press the [Mode Memory] key.
3
Select an unregistered key, and then touch [Register Program].
The Register Scan/Fax Program screen appears.
Register Program - Name
Enter the program registration name using up to 24 characters from the touch panel.
Register Program - Address
Select one address. Select an address using [Select from Address Book] or [Direct Input].