Konica Minolta bizhub 421 - Manual (Page 268)

501/421/361 10-3
PageScope Web Connection 10
10.1.3 Web browser cache
The most recent information may not appear in the PageScope Web Connection pages because older
versions of pages are saved in the cache for the Web browser. In addition, problems may occur when the
cache is used.
When using PageScope Web Connection, disable the cache for the Web browser.
!
Detail
The menus and commands may vary depending on the Web browser version. For details, refer to the
Help for the Web browser.
If the utility is used with the cache enabled and Administrator mode was timed out, the timeout page
may appear even when PageScope Web Connection is accessed again. In addition, since the
machine’s control panel remains locked and cannot be used, the machine must be restarted with the
main power switch. In order to avoid this problem, disable the cache.
With Internet Explorer
1
On the "Tools" menu, click "Internet Options".
2
On the "General" tab, click the [Settings] button under "Temporary Internet files".
3
Select "Every visit to the page", and then click the [OK] button.
With Netscape Navigator
1
On the "Edit" menu, click "Preferences".
2
Under "Category" on the left, click "Advanced", then "Cache".
3
Under "Document in cache is compared to document on network:", select "Every time".
With Mozilla Firefox
1
On the "Tools" menu, click "Options".
2
Click "Privacy", and then click the [Settings] button at the bottom of the dialog box.
3
Select the "Cache" check box under "Private data", select the "Clear private data when closing Firefox"
check box under "Settings", and then click the [OK] button.