beautypg.com

Line settings, Line settings -14 – Konica Minolta bizhub 421 User Manual

Page 185

background image

501/421/361

8-14

User mode settings

8

Line Settings

Specify transmission settings for the line.

!

Detail

To execute [Check Dest. & Send], the destination must have its fax number registered.

Item

Description

Overseas TX

In order to transmit a message surely, specifies a slow transmission speed
to send a Fax to an area in bad communication.

ECM OFF

Cancels ECM mode and cuts communication time to send data.
The ECM mode is an error request repeat method communication defined by
ITU-T (International Telecommunication Union). As faxes equipped with the
ECM mode communicate by checking if the sent data has an error, they can
prevent image blurring by the noise on the phone line.

V. 34 OFF

V. 34 is a communication mode used for Fax communication of super G3.
There are cases when the communication is not possible in super G3 mode
depending on the telephone line conditions when the recipient’s machine or
this machine is connected to the line via a private branch exchange.
It is recommended that you set V. 34 to off before sending a Fax. This ma-
chine automatically returns to V. 34 mode when it completes transmission.

Check Dest. & Send

A Fax is sent only after a comparison of the specified Fax number with the
Fax number information (CSI) for the recipient’s machine indicates a match.
This prevents misdirected transmissions since a transmission error occurs if
the numbers do not match.

Select Line

Select [Line 1] or [Line 2] to send a Fax if the fax multi line is installed. Specify
a line for transmission.

This manual is related to the following products: