Konica Minolta bizhub 421 - Manual (Page 123)

501/421/361 4-70
Transmitting data 4
4.8 Redialing (G3/IP)
Redialing refers to the action to dial the same recipient again.
Redialing takes place after a certain length of time when the line is busy and transmission has failed.
4.8.1 Redial
If transmission has failed because the line is busy, the recipient’s number is automatically redialed as many
times as specified in the Line Parameter Setting screen.
Until successfully redialed, the transmission job is handled as a scheduled job in a redialing queue.
!
Detail
The factory setting for automatic redialing is to have redialing performed three times at an interval of
three minutes. For details on how to set the number of automatic redialing instances, refer to
"Fax
Settings - Line Parameter Setting" on page 9-20 .
4.8.2 Manual redialing
A job in the redialing queue can be redialed from the Job Details screen.
Touch [Job List], [Job Details], then [Send]. Then select a job under "Current Jobs", and then touch [Redial].