Konica Minolta bizhub 421 - Manual (Page 127)

501/421/361 5-3
Receiving data (G3/IP/I-FAX) 5
5.2 Receiving data (G3: When the external phone is connect)
5.2.1 Manual RX (phone only)
This mode is useful if this machine is frequently used as a phone with an external phone connected to it.
To receive data through manual panel operation on this machine, when the external phone starts ringing,
touch [Off-Hook] in the Fax/Scan mode screen, and then check that [RX] is enabled. In the Off-Hook screen,
touch [Start].
When the machine is used in manual reception mode, the following settings are assumed.
- External phone: Connected.
- Line Parameter Setting - Receive Mode: [Manual RX] is specified.
!
Detail
To use the machine in the phone-only mode, set the receiving method to manual reception in the Line
Parameter Setting screen in the Utility mode.
Incoming
The external phone continues ringing
- Pick up the receiver and talk