5 receiving data (g3/ip/i-fax), 1 auto rx (fax only), Receiving data (g3/ip/i-fax) – Konica Minolta bizhub 421 User Manual
Page 126: Auto rx (fax only) -2, 5receiving data (g3/ip/i-fax)
501/421/361
5-2
Receiving data (G3/IP/I-FAX)
5
5
Receiving data (G3/IP/I-FAX)
5.1
Receiving data (G3: When the external phone is not connect)
5.1.1
Auto RX (fax only)
Specify this function for using the line as a dedicated line for fax transmission. Data reception automatically
starts after the ringing signal has been detected as many times as specified. During receiving operation, a
"Receiving" message appears in the message display field of the screen.
When the machine is in fax-only mode, the following settings are assumed.
-
External phone: Not connected.
-
Line Parameter Setting - Receive Mode: [Auto RX] is specified.
2
Note
For details on setting the line parameter, refer to
"Fax Settings - Line Parameter Setting" on
.
!
Detail
To enable auto reception, set the receiving method to "Auto RX" in the Line Parameter Setting screen
in the Utility mode.
Incoming
Reception starts automatically
Received
original