Konica Minolta BIZHUB 223 - Manual (Page 86)

bizhub 423/363/283/223 5-14
5.7 Printing (Netware) 5
In Print Server mode using the NetWare 4.x Bindery Emulation
0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select [Quick Setup] from [Available Options] list box, and press the Enter key.
4
Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth-
er/Unknown], and save them.
5
Terminate Pconsole by pressing the Esc key.
Then, configure the following settings in [NetWare Setting].
In NetWare 4.x Remote Printer mode (NDS)
1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup] from the Tools menu.
Item Description Prior check
[IPX Setting] Select [ON].
[Ethernet Frame
Type] Select a frame type to be used. Frame type
[NetWare Print
Mode] Select [Nprinter/Rprinter].
[Print Server Name] Enter a print server name to be operated as the Nprint-
er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |
+ = ? .). The print server
name specified in
Step 4
[Printer Number] Enter the Nprinter/Rprinter number.
Item Description Prior check
[IPX Setting] Select [ON].
[Ethernet Frame
Type] Select a frame type to be used. Frame type
[NetWare Print
Mode] Select [PServer].
[Print Server Name] Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .). The print server
name specified in
Step 4
[Print Server Pass-
word] Enter a print server password if necessary (up to 63 char-
acters).
[Polling Interval] Set a job inquiry interval.
[Bindery/NDS Set-
ting] Select [NDS/Bindery Setting].
[File Server Name] Enter the priority file server name to be used in the Bindery
emulation mode (up to 47 characters, excluding /\ :; , * [ ]
< > | + = ? .).