Konica Minolta BIZHUB 223 - Manual (Page 188)

bizhub 423/363/283/223 9-6
9.2 Linking an OpenAPI system with this machine 9
9.2.4 [OpenAPI Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [OpenAPI Setting].
Reference
- If [Enhanced Security Mode] is enabled, [Use SSL/TLS] is set to [SSL Only].
- When you use PageScope Authentication Manager for authentication from the printer driver, set
[System Connection] ö [OpenAPI Settings] ö [Authentication] to [OFF] in [Administrator Settings] on
the Control Panel. (Linking with PageScope Authentication Manager is available only when a Hard
Disk is installed. )
- If you select [OK] after changing multiple port numbers together in PageScope Web Connection or on
the Control Panel, a port number duplication error may be displayed. When this error is displayed, first
change one port number and select [OK]. Then change another one and select [OK].
Item Description Prior check
[Use SSL/TLS] To use SSL encryption, select [SSL Only] or [SSL/Non-
SSL]. Do you use
SSL/TLS?
[Port Number] Enter a port number.
[Port No. (SSL)] Enter the port number to be used for SSL communication.