Konica Minolta BIZHUB 223 - Manual (Page 313)

bizhub 423/363/283/223 14-14
14.5 Configuring settings for the fax functions 14
[TSI User Box Settings]
In the administrator mode of PageScope Web Connection, select [Fax Settings] ö [Function Setting] ö
[TSI User Box Settings].
Reference
- The TSI distribution function automatically distributes the document received with the sender fax
number (TSI) to the forwarding destination specified for each sender.
- This function cannot be configured together with [PC-Fax RX Setting], [Forward TX Setting], or [Memory
RX Setting].
- The TSI User Box Setting can be configured for each line when receiving faxes for each line (two op-
tional Fax Kit FK-508 are installed while [Individual Receiving Line Setup] is set to [ON] in [TX/RX Set-
tings]).
Item Description
[TSI User Box Setting] Select whether to enable the TSI distribution.
This function distributes received faxes to each phone number based on the
TSI (telephone numbers information) of the fax transmitter.
[Action when TSI User
Box is not set.] Select an action to be taken when receiving unregistered TSI information.
If you select [Automatically & Print], the received document is printed.
If you select [Memory RX User Box ], the received document is saved in the
Memory RX User Box.
If you select [Specified Box] and specify a User Box in [Select from User Box
No.], the received document is saved in the specified user box. For the desti-
nation User Box, a Public, Personal, or Group User Box can be specified.
[Specified User Box] is displayed only when a Hard Disk is installed.
[Print] Specify whether to print received faxes after completing the reception.