5 pop before smtp, Pop before smtp, E-mail rx (pop) – Konica Minolta BIZHUB 223 User Manual
Page 50: 5 pop before smtp [pop before smtp
bizhub 423/363/283/223
4-13
4.3
Sending scanned data by E-mail
4
4.3.5
POP before SMTP
[POP before SMTP]
In the administrator mode of PageScope Web Connection, select [Network] ö [E-mail Setting] ö [E-mail
TX (SMTP)].
[E-mail RX (POP)]
In the administrator mode of PageScope Web Connection, select [Network] ö [E-mail Setting] ö [E-mail
RX (POP)].
Item
Description
Prior check
[POP before
SMTP]
Select [ON] to perform POP before SMTP authentication.
Is POP before SMTP
authentication re-
quested by the serv-
er?
[POP Before SMTP
Time]
Enter the period from a time you log in to the POP server
to a time you access the SMTP server.
If the POP and SMTP servers are in different computers, it
will take time to notify the SMTP server that you have
logged in to the POP server. Therefore, if a too short time
is specified, sending of E-mails may fail.
Are the POP and
SMTP servers in dif-
ferent computers?
Item
Description
Prior check
[E-mail RX Setting]
Select [ON] to perform POP before SMTP authentication.
[POP Server Ad-
dress]
Enter the POP server address.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can
enter the host name instead.
When using IPv6, you can specify the IPv6 address.
Server address
[Login Name]
Enter the login name of the POP server (up to 63 charac-
ters).