Konica Minolta BIZHUB 223 - Manual (Page 292)

bizhub 423/363/283/223 13-3
13.1 Configuring initial settings for the printer function 13
[Banner Sheet Setting] Select whether to print banner sheets for each print job.
Printing banner sheets prevent mixing different printing materials.
[Banner Sheet Paper
Tray] Select the primary paper tray for printing banner sheets.
[No Matching Paper in
Tray Setting] Select the operation to be taken when there is no appropriate sized paper in
the specified paper tray.
Select [Switch Trays (Tray Priority)] to supply paper from a different paper tray.
Select [Stop Printing (Tray Fixed)] to stop printing and display a warning mes-
sage.
[A4/A3<->LTR/LGR
Auto Switch] Converts between inch and metric units.
Select whether to print an A4 (Letter)/A3 (Ledger)-sized original by full size
when a paper tray containing Letter (A4)/Ledger (A3)-sized paper is selected.
Selecting [ON] forces full size printing, which may cause images be defective.
[Binding Direction Ad-
justment] Select the binding position adjustment method used for 2-sided printing.
[Line Width Adjust-
ment] To adjust the line width so as to make thin lines and small letters easier to see,
select the line breadth.
[Gray Background Text
Correction] To adjust the line width in gray scale background so as to make thin lines and
small letters easier to see, select [ON].
Selecting [OFF] applies the [Line Width Adjustment] setting in gray scale back-
ground.
Item Description