Konica Minolta BIZHUB 223 - Manual (Page 149)

bizhub 423/363/283/223 8-9
8.2 Using device certificates depending on protocol 8
8.2 Using device certificates depending on protocol
Configure settings to use device certificates depending on protocol.
This machine enables you to use multiple registered device certificates depending on protocols. Configure
settings to fit your environment.
Reference
- This function is available only when a Hard Disk is installed.
You can specify the device certificate to be used for each of the following protocols in this machine.
Protocol1 Protocol2 Description
[SSL] [http Server] If this machine is used as an http server
•
If the client accesses PageScope Web Connec-
tion via HTTPS, it is used to encrypt communication
from the client to this machine.
• If the client prints data via IPPS, it is used to encrypt
communication from the client to this machine.
[SSL] [E-Mail Transmission
(SMTP)] If this machine is used as an SMTP client
•
This machine submits a device certificate upon re-
quest from the SMTP server.
[SSL] [E-mail RX (POP)] If this machine is used as a POP client
•
This machine submits a device certificate upon re-
quest from the POP server.
[SSL] [TCP Socket] If this machine is used as a TCP Socket client
•
This machine submits a device certificate upon re-
quest from the TCP Socket server.
[SSL] [LDAP] If this machine is used as an LDAP client
•
This machine submits a device certificate upon re-
quest from the LDAP server.
[SSL] [WebDAV Client] If this machine is used as a WebDAV client
•
This machine submits a device certificate upon re-
quest from the WebDAV server.
[SSL] [OpenAPI] If this machine is used as an OpenAPI server
•
If the OpenAPI client accesses this machine via
SSL, it is used to encrypt communication from the
client to this machine.
[SSL] [Web Service] If this machine is used as a Web service server
•
If Windows Vista or 7 accesses this machine via HT-
TPS, it is used to encrypt communication from Vista
or 7 to this machine.
[IEEE802.1X] If this machine is used as an IEEE802.1X authentication
client
•
If this machine is authenticated by the IEEE802.1X
server via EAP-TLS, it is used to encrypt communi-
cation.
• This machine submits a device certificate upon re-
quest from the server via EAP-TTLS or EAP-PEAP.
[S/MIME] This machine attaches a device certificate when send-
ing an S/MIME E-mail message.