13 configuring settings for printer function, Basic setting, Configuring settings for printer function – Konica Minolta BIZHUB 223 User Manual
Page 291
bizhub 423/363/283/223
13-2
13.1
Configuring initial settings for the printer function
13
13
Configuring Settings for Printer Function
13.1
Configuring initial settings for the printer function
Configure the initial settings for the printer function.
[Basic Setting]
In the administrator mode of PageScope Web Connection, select [Print Setting] ö [Basic Setting].
Item
Description
[PDL Setting]
Select the printer definition language.
[Paper Tray]
Select the primary paper tray.
[Output Tray]
Select the primary output tray.
[2-Sided Print]
Select whether to print in the 2-sided print format.
[Bind Direction]
Select the binding position for 2-sided printing.
[Staple]
Select whether to staple printed sheets. To staple printed sheet, select the
number of staples.
The staple function is available only when the optional finisher is installed.
[Punch]
Select whether to punch printed sheets. To punch printed sheets, select the
number of punched holes.
The punch function is available only when the optional finisher and punch kit
are installed.
[Number of Sets]
Enter the number of copies to be printed.
[Default Paper Size]
Select the paper size.
[Original Direction]
Select the orientation of an image to be printed.
[Spool Print Jobs in
HDD before RIP]
Select whether to spool print jobs to HDD.
This function can be specified only when a Hard Disk is installed.