Konica Minolta BIZHUB 223 - Manual (Page 170)

bizhub 423/363/283/223 8-30
8.10 Using IEEE802.1X authentication 8
8.10.3 [IEEE802.1x Authentication Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [IEEE802.1x Authentication
Setting] ö [IEEE802.1x Authentication Setting].
Item Description Prior check
[Authentication
Status] The authentication status is shown as follows.
•
[Authenticated]: The authentication has completed.
• [Authenticating]: The authentication is in progress.
• [Unauthenticated]: Not authenticated status.
• [Authentication Failed]: The authentication has failed.
• [Failed to Retrieve Status]: No authentication status
could be obtained.
When you press [Refresh], the authentication status is up-
dated.
[IEEE802.1x Au-
thentication Set-
ting] Select [ON].
[Supplicant Set-
ting] Configure settings required in order for this machine,
which is a supplicant (authentication client), to receive au-
thentication from the authentication server.
Configure settings to fit your environment.
[User ID] Enter a user ID (up to 128 characters).
This user ID is used for all EAP-Type options.
[Password is
changed.] Select this check box to change the password.
[Password] Enter the password (up to 128 characters).
The password is used for all EAP-Type options other than
[EAP-TLS].