Konica Minolta BIZHUB 223 User Manual
Page 208
bizhub 423/363/283/223
10-14
10.4
Monitoring this machine by SNMP Manager
10
[UDP Port Setting]
Enter a UDP port number.
Default setting: 161
[SNMP v1/v2c Set-
ting]
Configure the settings for SNMP v1/v2c.
[Read Community
Name]
Enter a community name used for reading (up to 15 char-
acters, excluding space and \).
[Write Community
Name]
Enter a community name used for reading and writing (up
to 15 characters, excluding space and \).
[SNMP v3 Setting]
Set the settings for SNMP v3.
[Context Name]
Enter a context name (up to 63 characters, excluding
space and \).
[Discovery User
Name]
Enter a context user for detection (up to 32 characters, ex-
cluding space and \).
[Read User Name]
Enter a user name of the read-only user (up to 32 charac-
ters, excluding space and \).
[Security Level]
Select a security level of the read-only user.
[Password is
changed.]
Select this check box to change the password.
[auth-password]
Enter the password of the read-only user for authentica-
tion (up to 32 from 8 characters, excluding space and \).
[Password is
changed.]
Select this check box to change the password.
[priv-password]
Enter the privacy password of the read-only user to be
used for privacy (encryption) (up to 32 from 8 characters,
excluding space and \).
[Write User Name]
Enter a user name used of the read and write-only user (up
to 32 characters, excluding space and \).
[Security Level]
Select a security level of the read and write-only user.
[auth-password]
Enter the password of the read and write-only user for au-
thentication (up to 8 to 32 characters, excluding space
and \).
[Password is
changed.]
Select this check box to change the password.
[priv-password]
Enter the privacy password of the read and write-only user
to be used for privacy (encryption) (up to 8 to 32 charac-
ters, excluding space and \).
[Password is
changed.]
Select this check box to change the password.
[Encryption Algo-
rithm]
Select an encryption algorithm.
[Authentication
Method]
Select an authentication method.
[Device Name]
Enter the name of this machine (up to 255 characters).
[Device Location]
Enter the location to install this machine (up to 255 char-
acters).
[Administrator
Name]
Enter the administrator name (up to 255 characters).
Item
Description
Prior check