Konica Minolta BIZHUB 223 - Manual (Page 85)

bizhub 423/363/283/223 5-13
5.7 Printing (Netware) 5
5.7 Printing (Netware)
Configure settings for printing in a NetWare environment.
Before you start printing in a NetWare environment, you must set the NetWare file system on this machine.
d
Reference
For details on how to install the printer driver, refer to the [User's Guide Print Operations].
The current NetWare connection can be checked if necessary. For details, refer to page 5-17.
5.7.1 [NetWare Settings]
In the administrator mode of PageScope Web Connection, select [Network]ö[NetWare Settings]ö[Net-
Ware Settings].
The required items depend on your operating environment. Set the items by referring to the following figure.
In Remote Printer mode using the NetWare 4.x Bindery Emulation
0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select [Quick Setup] from [Available Options] list box, and press the Enter key.
4
Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth-
er/Unknown], and save them.
5
Terminate Pconsole by pressing the Esc key.
6
Load the PSERVER.NLM file on the NetWare Server console.
Then, configure the following settings in [NetWare Setting].