Lenovo ThinkPad R61i - Manual (Page 65)

Table 22. (continued)
Command Parameters Parameter Values and Examples
To deselect all registry settings, set
to True. Otherwise, set to False or
leave it unspecified.
To overwrite existing files, set to
True. Otherwise, set to False or
leave it unspecified.
To specify the directory to where
log files are written, enter a fully
qualified directory name. You can
specify a shared directory on
another system.
If you do not set this parameter,
the log files write to d:/InstDir/,
where c is the drive letter of the
hard disk drive and /InstDir/ is
the directory where the applications
are installed.
To specify the directory to where
temporary files are written, enter a
fully qualified directory name. You
can specify a shared directory on
another system.
If you do not set this parameter,
temporary files are written to
c:/InstDir/etc/data, where c is the
drive letter of the hard disk drive
and /InstDir/ is the directory
where the applications are installed.
To copy only those icons that have
active links, set to True. Otherwise,
set the parameter to False or leave
it unspecified.
File-migration commands
System Migration Assistant processes file-migration commands in the following
order: file inclusion commands are performed first, then file exclusion commands
are performed from the inclusion files.
System Migration Assistant selects and unselects files on the basis of the original
location of files and folders on the source computer. File redirection statements are
stored in the profile and are interpreted during the apply phase. File migration is
recursive into sub-directories.
The processing of file and directory names is not case sensitive.
Chapter 4. Rejuvenation and migration 57