Lenovo ThinkPad R61i - Manual (Page 114)

Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup Capture Migration
Info Enable or disable ’Capture
Migration Info’ as a backup option.
When enabled, with each backup,
data is collected that permits the
System Migration Assistant to
transfer current system settings to
another machine, should the need
arise. Default: Enabled.
Backup Backup SP Second Enable or disable ’Backup SP
Second’ as an option. When
enabled, the system service partition
can be backed up to the second
system drive. Default: Disabled.
Backup Backup SP USB Enable or disable ’Backup SP USB’
as an option. When enabled, the
system service partition can be
backed up to the USB drive.
Default: Disabled.
Backup Backup SP Network Enable or disable ’Backup SP
Network’ as an option. When
enabled, the system service partition
can be backed up to the network.
Default: Disabled.
Backup CPU Priority CPU Priority of backups. Values: 1-5
(1=Lowest Priority, 5=Highest
Priority). Default: 3.
Backup Yield ’Yield’ indicates amount of delay to
insert between disk writes during a
backup. This permits system
backups from hogging all of the
disk i/o bandwidth. Values: 0-8
(0=off, 8=least disk activity) Default:
0.
Backup Boot Disc Enable or disable the creation of a
’Boot Disc’ when backing up to
CD/DVD or creating an archive to
those media. Default: Enabled.
Backup VerifyDisc Enable or disable ’Verify Disc’ when
backing up to a CD/DVD or
creating an archive to those media.
Default: Enabled.
Backup Battery Percent
Required ’Battery Percent Required’ before
commencing a scheduled backup.
This policy ensures there is enough
battery power left to complete a
backup. Values: 0-100. Default: 0.
Backup Skip Locked Files Enable or disable ’Skip Locked Files’
when backing up. If enabled, locked
files will be not be backed up.
Default: Disabled.
Backup Min Percent Free
Space The minimum percent of free space
on the destination drive required for
backup. Values: 0-100. Default: 0.
106 Rescue and Recovery 4.21 Deployment Guide