Lenovo ThinkPad R61i - Manual (Page 49)

Button00=[0-10], "title", file.bmp
Following the title text, specify the file name of the bitmap that you want
to use as an icon for the button being created. The bitmap must be no
larger than 15 pixels by 15 pixels to fit correctly.
Button00=[0-10], "title", file.bmp, [0 or 1]
This setting directs the environment to display or hide the entry. The value
0
hides the entry. If the value is set to 0, then the a blank line is displayed.
The value 1 displays the entry.
Button00=[0-10], "title", file.bmp, [0 or 1], 1
This is a reserved function and must always be set to 1.
Button00=[0-10], "title", file.bmp, [0 or 1], 1, [0 or 1]
To require a password prior to starting an application, place a value of 1 in
this position. If you set this value to 0, no password is required before a
specified application is started.
Button00=[0-10], "title", file.bmp, [0 or 1], 1, [0 or 1],
%tvtdrive%[pathname\executable]
The value of %tvtdrive% must be the boot drive letter. Following the boot
drive letter, you must provide a fully qualified path to an application or
command file.
Button00=[0-10], "title", file.bmp, [0 or 1], 1, [0 or 1],%tvtdrive
%[pathname\executable], [parameters]
Provide the parameters required by the target application that is being
started.
If you are not providing values for various fields, you must provide the required
commas in order for the button definition to be accepted and to run correctly. For
example, if you are creating a group heading,
″Rescue and Recover,″ the following
would be the code for the entry:
Button04=1, "Rescue and Recover",,,,,,
Entries 02, 07, 11 and 16 must remain type 0 (or header) entries, and they always
fall in their numerical places. The availability of entries that fall under the headers
can be reduced by setting fully customizable entries to type 0-blank lines in the left
panel. However, the total number of entries cannot exceed twenty-three.
The following table shows the function and executable that you can start from the
left-panel entries:
Table 19. Left-panel functions and executables
Function Executable
Recover files WIZRR.EXE
Restore from backup WIZRR.EXE
Create migration file WIZRR.EXE
Open browser OPERA.EXE
Map a network drive MAPDRV.EXE
Diagnose hardware PCDR.CMD; launches the PC Doctor
application, IBM, and Lenovo-branded
preinstallation models only
Create diagnostic diskettes DDIAGS.CMD
Chapter 3. Configurations 41