Lenovo ThinkPad R61i - Manual (Page 137)

Repository
The repository path for the mailbox is set in the registry at the following location:
HKLM\SOFTWARE\Lenovo\Rescue and Recovery\ADM
Each client needs list of repositories. This should include a floppy and C:\ as well
as at least one network drive specified with a UNC; mailbox = which is the drive
and path to mailbox locations, with a comma, and separated in order of
importance. Example:
"mailbox"= c:\antidote
Schedule information
Schedule information is set in the registry at HKLM\SOFTWARE\Lenovo\Rescue
and Recovery\ADM with the following setting:
v ″Task″=″C:\\Program Files\\Lenovo\\Rescue and Recovery\\ADM\\
mailman.exe
″
v ″Mode″=dword:00000004 ″Hour″=dword:00000012
v
″Minute″=dword:00000000 ″DayOfWeek″=dword:00000003
The Schedule Mode is the frequency of checks.
Table 38. Schedule modes
Schedule Mode
SCHED_NONE 0x000
SCHED_MINUTELY 0x001
SCHED_DAILY 0x002
SCHED_WEEKLY 0x004
SCHED_MONTHLY 0x008
SCHED_STARTUP 0x010
SCHED_WAKEUP 0x020
SCHED_USB_ATTACH 0x040
SCHED_NETWORK_ATTACH 0x080
SCHED_NETWORK_DETACH 0x100
Signing Key
If signing keys will be used, then they must be distributed to the client. The file
keyfile.pub created by the APKGMES command contains the key. Each authorized
public signing key appears in the registry. Use the APUBKEY function to set the
following value: nosig = If it is set to 1, it will allow unsigned packages (packages
built with the /NOSIG parameter) to be run. The following provides the registry
location for the Signing Key:
HKLM\SOFTWARE\Lenovo\Rescue and Recovery\ADM
"NOSIG"=dword:00000001
Note: If it is not set to 1 or if public keys are present in the registry, unsigned
packages will not run.
Network Drives
The following values are set by using the AUNCPW function RscDrvY and stored
in the registry at HKLM\Software\Policies\Lenovo\MND\4.0\AD. The
Appendix B. Antidote Delivery Manager 129