Removing factory restore, Configuring the opera browser – Lenovo ThinkPad R61i User Manual
Page 51
Lenovo License Agreement HTML page.
v
HELP
Help
v
LICENSE
License
v
CANCEL
Cancel
v
Command0
%tvtdrive%Preboot\Helps\en\f_welcom.htm
v
Command1
%tvtdrive%Preboot\Helps\en\C_ILA.htm
To hide the Welcome window, change NoShowCk=0 to NoShowCk=1. To change the
display fonts for the title and welcome text, edit the last three lines of the
preceding example according to your font design preferences.
Note:
Do not change or delete lines 13 and 14.
In the [REBOOT] section of the pdaguixx.ini (where xx is the language designation)
file, you can modify the values in the following lines:
NoShowChk=
RebootText=
The two values for
″NoShowChk″ are 0 and 1. To hide the message, mark the
check box. When the check box is marked, the value is set to 0. To have the
message displayed, change the value to 1.
If necessary, the font for messages in the [REBOOT] section can be changed. For
example, this value can be set as follows:
RebootText = "Arial"
Note:
The following sections of pdaguixx.ini (where xx is the language
designation) are available in the file, but cannot be customized: [Messages],
[EXITMSG], and [HelpDlg].
Removing Factory Restore
To hide the Restore to Factory Contents option in Windows PE, rename the file
\preboot\recovery\Recover.cmd to another name and that option will not appear
on the wizard. That renamed .cmd file can later be run to restore from factory
contents. If the service partition has been removed, then this step is not necessary.
Configuring the Opera browser
The Opera browser has two configuration files: the default configuration file, and
the active configuration file. An user can make changes to the active configuration
file, but loses changes made when Rescue and Recovery is restarted.
To make permanent changes to the browser, edit the copies of both the opera6.ini
and the norm1.ini that are on the %systemdrive% (C:) in the following folder path:
C:\PREBOOT\OPERA\PROFILE. The temporary, active copy of opera6.ini is on
the ramdrive (Z:) in the Z:\PREBOOT\OPERA\PROFILE directory.
Chapter 3. Configurations
43
- ThinkPad SL300 ThinkPad R61e ThinkPad R61 ThinkPad T400s ThinkPad SL500c ThinkPad X61 Tablet ThinkPad X300 ThinkPad Edge 15 ThinkPad R52 ThinkPad R51e ThinkPad X41 Tablet ThinkPad SL400c THINKPAD Z60M ThinkPad L410 ThinkPad L510 ThinkPad Edge 13 ThinkPad W500 ThinkPad T61p ThinkPad SL510 THINKPAD X61 ThinkPad SL410 ThinkPad X61s THINKPAD T61 ThinkPad Z61e ThinkPad X60 Tablet ThinkPad W701 ThinkPad Edge 14