Lenovo ThinkPad R61i - Manual (Page 135)

Table 36. Antidote Delivery Manager commands (continued)
Commands Description
STATUS [/QUERY location
message_name | /CLEAR
location] The STATUS /QUERY command can be used to
determine if a script has been run, or is queued to be
run. The location value must be one of the following:
v FAIL
the message has already run and failed
v SUCCESS
The message has been completed successfully
v WORK
The message is currently being run, or will run
next time Antidote Delivery Manager is run.
v CACHE
The message is queued to run.
The STATUS/CLEAR command will clear the location
specified. Return values are:
v 0 = if the specified message found or the command
completed successfully
v 1 = if the specified message not found or the
command failed
MAILMAN [/RRU | RESET | /MB
mailbox | /STATUS This command checks for mailbox locations and
processes fixes found there. The following list
provides the parameters:
v RRU
This parameter runs .ZAP which is stored in the
Post Restore directory after each restore.
v RESET
This parameter halts processing of the currently
running script.
Note:
This parameter should only be used in
extenuating circumstances since usage is likely to
cause errors.
v STATUS
This parameter returns a bitmask to indicate the
current condition of the Antidote program. Return
values are:
– 0 = Antidote is configured properly
– 1 = No mailbox defined
– 2 = There are no keys defined, or NOSIG=1 is
not defined
Supported Microsoft commands
The following table provides supported Microsoft commands.
Table 37. Supported Microsoft commands
Commands Description
ATTRIB.EXE Displays or changes file attributes.
CACLS.EXE Displays or modifies access control list (ACLs) of files.
CHKDSK.EXE Checks a disk and displays a status report.
Appendix B. Antidote Delivery Manager 127