Lenovo ThinkPad R61i - Manual (Page 41)

v Display the disk space usage of \RRbackups directories.
Predesktop Area directory list
RRUTIL /lx [dirlist.txt]
Create a list of the contents of the \preboot, \minint, or root directories of the
Predesktop Area partition either virtual or type 12:
1.
The data is written as a text stream of all the files in each sub directory to a file
named dirlist.txt in a directory name supplied by the user, or to the root of
drive c:\ if not path is given.
2. This would be the equivalent of the following DOS style command (“dir * /s >
c:\temp\dirlist.txt”) in the directory of interest. Listing of the contents of the
root of the PE partition would be “dir * > c:\temp\dirlist.txt” only. Example
output:
Directory of \
10/20/03 00:00:00 AM 42 AUTOEXEC.ICR
03/12/04 00:00:00 AM 42 AUTOEXEC.bat
03/10/04 00:00:00 AM 165 BOOT.INI
08/16/02 00:00:00 AM 53786 COMMAND.COM
12/16/03 00:00:00 AM 222 CONFIG.ICR
12/16/03 00:00:00 AM 222 CONFIG.SYS
04/06/00 00:00:00 AM 655 FINDDRV.BAT
09/17/03 00:00:00 AM 14320 HIMEM.SYS
3. An optional command line input will be a text file to capture the output of this
option.
4. Sample command: RRUTIL /lx [dirlist.txt] Note: Enablement of the
optional entry may be deferred to a later release.
The following list provides the values for x:
v 1 \preboot
v 2 \minint
v 4
Multiple listings would be simple addition of each x. So \preboot and \minint
would be a value of 3. dirlist.txt contents:
\minint\system32\drivers*.sys
\preboot\startup\*.*
Get files from Predesktop Area directories
RRUTIL /g getlist.txt
Copy individual files from the \preboot, \minint , or root of the PE partition either
virtual or type 12:
1.
A text file identifies the files that should be copied to a location specified in the
command line.
2. The must be an existing directory that will receive the files
from the Predesktop Area. The files will be copied in this directory in same tree
structure as they are found in the Predesktop Area. This will avoid same name
files from copying over each other.
3. Sample command: RRUTIL /g getlist.txt getlist.txt
contents:
\PELDR
\preboot\startup\Restore.cmd
\preboot\usrintfc\PDAGUI.ini
Chapter 3. Configurations 33