AMX MVP-5100 - Manual (Page 45)

Configuring Communication
37 MVP-5100/5150 Modero Viewpoint Touch Panels
3. Right click on the selected device and select Properties to open the Local Area Connection
Properties window (FIG. 31).
4. In the Local Area Connection Properties window (FIG. 31) under the General tab, select Internet
Protocol (TCP/IP) and click on Properties to open the Internet Protocol (TCP/IP) Properties
window. (FIG. 32)
5. In the new window:
Select Use the following IP Address.
Under IP address, provide an IP address, ensure that it is in the same subnet as the IP address
given to the USB interface on the device. The IP address for the device can be located on the
FIG. 31 Local Area Connection Properties
FIG. 32 Internet Protocol (TCP/IP) Properties