AMX MVP-5100 - Manual (Page 42)

Configuring Communication
34 MVP-5100/5150 Modero Viewpoint Touch Panels
Panel downloads and firmware updates
The MVP-5100 and MVP-5150 devices support a USB driver for panel downloads and firmware
updates. This means that the devices connect to a host computer for updates through their Mini USB
ports (FIG. 26). All touch panel setup is done through NetLinx Studio and TPDesign4.
Touch panel setup
To prepare the device for USB communication:
1. Turn on the device and wait for it to finish booting up.
2. Make sure that you have downloaded the latest versions of NetLinx Studio and TPDesign4,
available from www.amx.com.
3. Insert the mini-USB end of the USB Programming Cable into the mini-USB port on the device.
Insert the other end into the appropriate USB port on the computer containing the files to be
downloaded.
4. If the connection goes well, the Windows XP machine will detect the device as an unsupported USB
device. It then presents a dialogue box that prompts the user for a suitable driver (FIG. 27):
5. Select Yes, this time only and click on Next.
FIG. 26 USB Port on the MVP-5100/5150
Mini-USB Port
Firmware downloads require use of the USB Programming Cable (FG10-5965) and a
computer running Windows XP.
FIG. 27 Found New Hardware Wizard dialogue box