Recharging – AMX MVP-5100 User Manual
Page 19
Accessories
11
MVP-5100/5150 Modero Viewpoint Touch Panels
Recharging
To recharge the touch panel:
1.
Slide the device into the Wall Charging Station cradle bottom-first and make sure the device is fully
seated in the Charging Station.
2.
Press the top of the touch panel back until it clicks. The touch panel is now locked into the Charging
Station, and the station will automatically charge the device’s battery. (Please refer to the Battery
Settings Page section on page 53 to check on the battery charge status.)
3.
To release the touch panel, unlock the touch panel and wait for the Wall Charging Station to pivot
the touch panel away from the wall.
This manual is related to the following products: